webleads-tracker

Ultraprobe 2000 - UE Systems

Ultraprobe 2000

Durable analog Ultrasound detector with frequency adjust for quick and accurate inspection

The industry’s most comprehensive analog ultrasound instrument!

Fast, accurate, and designed for ease of use, it often takes no more than 15 minutes to become competent in ultrasonic testing using the Ultraprobe® 2000.

Find compressed air and faulty steamtraps, prevent machinery failure & listen to electrical systems for discharges.

Why Choose this instrument?

  • Easy to use
  • Frequency adjust possibility 20-100 kHz
  • Accurate analogue meter with meter mode function
  • Ideally for point & shoot trouble shooting

Ultrasound Technology is the smart approach to inspection:

  • Ultrasound is very directional and localized
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Changes in Ultrasound provide early warning of potential problems
  • Ultrasound instruments are easy to use!

The Ultraprobe® 2000 also enables data reporting through three modes: through auditory channels (via a headset that has been specifically selected for heavy duty industrial use), through a uniquely designed bi-modal analog meter, and through the ability to interface with vibration analyzers, & sound recording devices via the heterodyned output.
For use in hazardous environments, an ATEX or EX rated model is also available.

The Ultraprobe® 2000 can be adapted to test practically any problem in operating equipment with such features as:

  • FREQUENCY TUNING enables a user to tune into problem “sounds” while minimizing background interference.
  • METER MODE selection adjusts the meter response from a real time response to an averaging response. This feature allows accurate adjustments for leak detection and for mechanical analysis.

The Ultraprobe® 2000 can heterodyne ultrasound into audible range providing accurate sound reproduction.
Sensitive only to ultrasonic frequencies, the Ultraprobe® 2000 will not respond to the low frequency noises often associated with most plant equipment. Therefore, the instrument can be effectively utilized in very loud factory environments.

This unique instrument offers a unique & accurate listening experience for your troubleshooting needs!

STANDARD AVAILABLE KITS:

Complete with everything you need to for accurate route inspection, the Ultraprobe® 2000 includes standard:

  • ULTRAPROBE housing with metered pistol grip, ballistic meter, frequency tuning dial, 10 turn potentiometer, numerically calibrated sensitivity dial with selection lock, bi-modal meter selector switch, battery, battery indicator light, battery recharger receptacle and head set receptacle.
  • Deluxe industrial noise reducing headset
  • Battery recharge kit for main housing and warble tone generator
  • Zero Halliburton aluminum carrying case
  • Comprehensive instruction manual

For further components per kit configuration:

UP2000LRM: ULTRAPROBE 2000 LONG RANGE KIT

  • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
  • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
  • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
  • Extension probe kit to increase stethoscope contact range to 78 cm (31 inch)
  • Warble tone generator with amplitude selection switch for use in tone test method
  • Long range module (LRM-2) for more accurate & extended range of detection for leak detection or electrical emissions

UP2000CFM: ULTRAPROBE 2000 CLOSE FOCUS KIT 

  • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
  • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
  • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
  • Extension probe kit to increase stethoscope contact range to 78 cm (31 inch)
  • Warble tone generator with amplitude selection switch for use in tone test method
  • Close focus module (CFM-2) for low level leaks & vacuum leak detection

UP2000KT: ULTRAPROBE 2000 KIT

  • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
  • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
  • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
  • Extension probe kit to increase stethoscope contact range to 78 cm (31 inch)
  • Warble tone generator with amplitude selection switch for use in tone test method

UP2000SC: ULTRAPROBE 2000 STETHOSCOPE / SCANNER KIT

  • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
  • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
  • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
  • Extension probe kit to increase stethoscope contact range to 78 cm (31 inch)

UP2000S: ULTRAPROBE 2000 SCANNER KIT

  • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
  • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound

UP2000C: ULTRAPROBE 2000 STETHOSCOPE KIT

  • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
  • Extension probe kit to increase stethoscope contact range to 78 cm (31 inch)

All Ultraprobe instruments are CE approved.

SPECIFICATIONS OVERVIEW UP 2000KT:

Construction: Hand-held metered pistol type made with aluminum and ABS plastic
Circuitry: Solid State heterodyne receiver with temperature compensation
Frequency Response: Frequency Detect ultrasonic frequencies between 20 kHz and 100 kHz, continuously variable Frequencies are converted to 50 kHz to 3 kHz audio
Probes: Scanning Module patented Trisonic plug-in type consisting of a phrased array of multiple transducers for airborne ultrasound. This probe is shielded against RF interference.
Rubber Focusing Probe (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit isat maximum sensitivity.
Stethoscope Module – Plug-in type, insulated probe with RF shielding; 11,4 cm (4 1/2′) long stainless steel probe tip, conically shaped for uniform surface contact. Stethoscope Extension Kit: 3-piece, segmented metal rods to increase stethoscope contact range for 50,8 cm (20”) and 76.2 cm (31”).
Transmitter: Patented warble tone transmission
Headset: Noise isolating type: Double headset wired monophonic. Impedance 16 ohms. Over 23 dB os noise attenuation. Meets or exceeds ANSI specifications and OSHA standards. For hard hat use.
Indicators: Ballastic output meter; linear calibration scale of 0-100 for logging relative measurements.
Meter is accurate 1% throughout entire scale. Low Level Battery LED indicator for main housing internal power supply.
Battery: Self contained NiMH rechargeable. RECHARGING SYSTEM: Standard 110V. Also availible in 220V.
Features: Frequency Tuning Adjustment Dial: 20-100 kHz with “fixed band” position for ultra-narrow frequency response.
Bi-Modal Meter Switch for logarithmic and linear meter scale adjustments.
Optional Auxiliary Mode selection for chart recorder output: 0-50 mV.
Sensitivity Control – Precision 10-turn adjustment dial with numerically calibrated sensitivity increments for finite gain adjustment.
Spring loaded trigger switch
Overall Size: Complete kit in Zero Halliburton aluminum carrying case:
47 x 37 x 17 cm (18.5 x 14.5 6.5 )
Pistol unit: 0.9 kg (2 lbs.)
Complete carrying case:6.4 kg (14 lbs.)
Sensitivity: Detecs 0.127 mm (0.005) diameter leak @ 0.34 bar (5 psi)
at a distance of 15.24 m (50ft.)
Threshold: 1 x 10-2 std. cc/sec to 1 x 10-3 std. cc/sec
Warranty: 1-year parts/labor standard.
5 years with completed warranty registration card.
Display Modes Logaritmic and linear * depends on leak configuration ** specify Ex rating if needed at time of order

Brochure UP 2000

Brochure UP Accessories

Brochure UP Applications

Manual UP 2000

DHC-2HH-BT manual placeholder

Manual DHC-2HH Bluetooth Headset

 

View online tutorials & webinars in our learning center section >


  • DHC-2BT-TM: DELUXE BLUETOOTH HEADSET WITH TRANSMITTER FOR USE WITH HARDHAT

    Wireless Bluetooth headset with transmitter for use in high noise environments. Acts as hearing protection device. Convenient for use with hard hats. Velcro loop head band adjusts for all sizes.


  • HTS-2: HOLSTER SET

    One for the Ultraprobe pistol, module and headphones, the other for accessories. Keeps hands free for walking routes and climbing up and down ladders.


  • LRM-2: LONG RANGE MODULE

    Detect Ultrasound at a greater distance with higher pinpoint accuracy. This parabolic shaped receiver helps to bring distant leaks or electrical emissions close-up.


  • CFM-2: CLOSE FOCUS MODULE

    A specialized module to help locate LOW LEVEL pressure and vacuum leaks.


  • TFSM-2 TELESCOPING & FLEXIBLE SCANNING MODULE with RAM (Remote Access Module)

    Extend and Bend this probe to odd angles to locate sound sources in hard to reach areas. (up to 2 m / 78 inch)


  • UWC-2: ULTRASONIC WAVE FORM CONCENTRATOR (PARABOLIC DISH)

    The UWC doubles the detection range of standard scanning modules and pinpoints ultrasonic leaks & electric emissions at great distances.


  • FSM-2: FLEXIBLE SCANNING MODULE

    Bend this probe to odd angles to locate sound sources in hard to reach areas.


  • EXC-2: MODULE INTERCONNECTION CABLE

    Shielded cable, works with either module for hard to reach areas. Standard length: 2.4 m (8′). Lengths up to 15 m (50 ft) are available.


  • UE-RAS-MT: REMOTE ACCESS SENSOR

    Magnetically mounted contact probe with cable for testing consistency and for hard to reach test points. Must be used in combination with Remote Access Module (RAM) shown below.


  • UE-RAM: Remote Access Module

    Adaptor Enabling Ultraprobe 2000 To Read RAS Sensor.


  • WTG-2SP: WARBLE PIPE TONE GENERATOR

    For leak detection without pressure or vacuum. Heat exchangers, tanks with small openings or pipe sections can be quickly flooded with ultrasound for leak testing.


  • UFMTG 1991: MULTI-DIRECTIONAL TONE GENERATOR

    This extremely powerful ultrasonic transmitter contains a multiple array of four transducers that produce UE Systems patented warble tone to cover a circular pattern of 360°.

 

Download a copy of the DNV Hatch testing certificate >

 

Download a copy of the UP2000 CE declaration of conformity >

 

See the UP2000ATEX section for ATEX information >

 

Ultraprobe 2000 is covered by one or more of the following patents:
0151115; 0303776; 0315199; 1206586; 1297576; 1881263; 2562758; 2689339; 4416145; 4823600; 5955670; 6122966; 6339961; 6341518; 6415645; 6655214; 6707762; 6804992

Ultraprobe 2000 meets and exceeds ASTM E1002-2005 requirements for leak detection. Government codes NSN:
6635-01-156-3927, FSCM (CAGE) Code: 59202. Table of allowance #s: 788, 404, 576, 583, 607.